Search the selected area by proposal, reference, status, type, authority or date.
38 applications found.
Erection of a detached two storey dwellinghouse (Use Class C3) following the demolition of existing garages. Provision of associated amenity, cycle parking, waste storage spaces and alterations including landscaping.
Loft conversion with new rear dormer.
Details pursuant to Condition 3 (HMO Management Plan) attached to PP 26/01651/FUL for the change of use from a 4-bedroom 4-person small HMO (Class C4) to a 8-bedroom 8-person large HMO (Sui Generis). Provision of associated onsite parking, refuse and cycle stores.
Conversion to form a 9 bedroom 10 person House in Multiple Occupation (HMO), provision of associated refuse and cycle storage within the front forecourt and rear garden area.
Change of use from Class B8 (storage and distribution) to Class B2 (general industrial) for use as an MOT testing and vehicle servicing centre, together with associated internal alterations.
Erection of a hip-to-gable roof extension and erection of an L shaped dormer with associated internal alterations
Single storey wrap around extension
Loft conversion incorporating a rear dormer extension, installation of 2 front rooflights, and formation of an inward-opening glazed door with Juliette balcony at the rear, to facilitate the reconfiguration of the existing first floor flat into a 2-bedroom, 3-person self-contained dwelling (Use Class C3). No change of use.
Conversion of a Single dwelling House to form 1x Three Bedroom , 1 x Two Bedroom and 1 x One Bedroom Self Contained Flats with a First Floor Rear, Ground Floor Rear and Side and Loft Conversion with a Rear Dormer and associated Recycle and Bins and Cycle Storage with Amentia Spaces with the Garden and the Loft.
Changes to the facade and materiality of the building and replacement of the roof. Alterations to windows and doors, erection of brick-slip piers along existing piers of the facade. Creation of nerw entrances, callding of building wall in brick-slips, erection of new roof and assocaited works.
Demolition of the existing rear extension and erection of a single storey rear extension which projects out from the rear wall of the original house by 5 metres, with an eaves height of 3 metres and a maximum height of 3.20 metres
Alterations and erection of single storey side and rear extensions, alterations to include the removal the existing chimney and construction of a dormer extension within the rear roof slope (amended description)
Dormer extension including front roof lights, minor external alterations to windows at ground floor and replacement windows to remainder of property.
Alterations to outbuilding at rear
Erection of a gate with a maximum height of 1 metre
Use of the site for the design and manufacture of level & angle measuring instruments (Class E (g) (iii)) with ancillary office space. The installation of new windows to the building and other associated site alterations
Subdivision of the rear garden of 256 Sydenham Road and construction of a single-dwelling family home (3b4p) with associated private amenity space and secured bicycle and refuse storage.
Change of use from single dwelling house (Class C3) to a 5-bedroom 5-person house in multiple occupation (Class C4).
Alterations and erection of a single storey side extension.
The formation of a joint vehicular access point with a dropped curb for 413 and 415 Davidson Road CR0 6DS.
Installation of External Wall insulation (EWI) to the front, side and back of the house and alterations to the facade
Use of an existing dwellinghouse as a childrens residential home (use class C2)
Demolition of the existing rear outrigger and erection of single storey rear extension, construction of a dormer extension within the rear roof slope and installation of three rooflight windows within the front roof slope, installation of pipe and part removal of chimney.
Demolition of existing car repair garage and scrap yard and erection of 3 X 4 bedroom two storey dwellings with associated garden, cycle stores and bin stores.
Check recent applications before setting up alerts. This prevents older applications being sent as new alerts.
Preparation uses a shared source check. Busy sources or larger areas may need the next scheduled collection. No alerts are enabled or emails sent by this step.
