Search the selected area by proposal, reference, status, type, authority or date.
5 applications found.
Tree Preservation Order Application (29 of 1988): Oak (T1) - Crown lift to roughly 20ft from ground level by removing the epicormic growth from stem. Whole crown reduction back to previous pruning points. To maintain shape and generate more light into garden. Before work height 14m to 12m after. Before work width 10m to 8m after.
TPO application to cut branches of four sycamore trees back to boundary line due to overhaning into garden as shown in photos
Conservation Area Notification: 1x Horse Chestnut - Cut back the branches that are encroaching so that they are in line with the boundary. The estimated height of the tree is 15-20m and estimated width is approx 12m. After the proposed pruning the height will remain the same but the width will be approx 10m.
Conservation area notification to reduce the crown of one (T1) Maple tree from a height of 12m to 9m and from a width of 9m to 7.5m, to dismantle one (T2) Dead Magnolia to as low as possible, one (T3) Whitebeam to reduce the crown from a height of 9m to 7m and the width from 7.5m to 6m, one (T4) Tulip to reduce the crowns height from 10m to 7.5m, one (T5) Holm oak to reduce the crown from a height of 10m to 8m and to reduce the width from 7.5m to 6m, one (T6) Copper Birch to reduce the crown from 12m to 9m, one (T6) Copper Birch to reduce the crown from 12m to 9m, and to reduce the crown of one (T7) Silver Birch from a heigh of 12m to 9m and to reduce the width from 10m to 8m
Garage conversion into a habitable space, demolition of existing porch and replace with the erection of a pitched roof front porch, removal of existing chimney and changes to fenerstration.
Check recent applications before setting up alerts. This prevents older applications being sent as new alerts.
Preparation uses a shared source check. Busy sources or larger areas may need the next scheduled collection. No alerts are enabled or emails sent by this step.
