Search the selected area by proposal, reference, status, type, authority or date.
38 applications found.
Prior approval application (Part 1, Class A) for construction of single storey rear extension; depth extending from the original rear wall by 4.30 metres, a maximum height of 2.95 metres and an eaves height of 2.95 metres
Extension to the outdoor riverside seating area, including decking, handrail and balustrade, fencing, gate, steps, and soft landscaping.
Loft conversion with rear dormer and three roof lights to front
Replacement access bridge
Discharge of Condition 3 (Door Details) attached to 3/23/2257/LBC
Part demolition of building and part demolition to the rear; conversion of the basement and ground floor to provide Class E (c & (g)(i)) use; change of use to Class C3 Use (Residential) at first and second floors with access from the ground floor; creation of 5 x 1 bedroom apartments and 2 x 2 bedroom apartments; conversion of the barn to 2 x 2 bedroom dwellings; construction of 6 x 3 bedroom new dwellings, 1 x 4 bedroom terraced houses with roof terraces and car ports, and 1 x 3 bedroom house with roof terrace and garage. Associated drainage, cycle stores, bin stores, car parking, and landscaping
Variation of Condition 2 (Approved plans) pursuant to planning permission (ref: 3/23/1892/FUL /Dated 03/05/2024) for (Demolition of single storey rear extension. Division of existing Class E unit to create 2 Class E units at basement and ground floor. Change of use at first and second floor to create two C3 residential dwellings. Installation of secondary glazing to front elevation. Alterations to rear to include creation of a courtyard, raising of and alterations to roof at second floor, installation of rear windows and doors, the insertion of external staircase and gantry, installation of 2 no. heating and cooling units and the creation of cycle parking and bin store). The amendments include alterations to the scheme to comply with building regulations
Variation of Conditions 2 (approved plans), 5 (new window), 6 (new doors), 7 (new plasterwork), 8 (new external rendering), 11 (Pipework and Drainage), 12 (Ventilation and Ducting), 13 (Acoustic/Insulation Boards), 14 (New Staircases), 15 (Extracts and Vents) and 16 (A/C Units Screening) pursuant to planning permission (ref: 3/23/1893/LBC/Dated 03/05/2024) for (Demolition of single storey rear extension. Division of existing Class E unit to create 2 Class E units at basement and ground floor. Conversion of Class E office space to habitable living and WC space to create 2 no. new dwellings. Installation of secondary glazing to front elevation. Alterations to rear to include creation of a courtyard, raising of and alterations to roof at second floor, installation of rear windows and doors, the insertion of external staircase and gantry, installation of 2 no. heating and cooling units and the creation of cycle parking and bin store. Insertion and removal of partition walls and doorways. Installation of internal staircase, and 2 no. mechanical ventilation and heat recovery (MVHR) systems including ducting). The amendments include alterations to the scheme to comply with building regulations
Listed building consent for repairs to the ground floor section of timber framing at the eastern end of the building (internal)
Single storey rear extension with flat roof and patio steps
Change of Use from Sui Generis to Class E(g)iii for a Pottery Studio
New outbuilding/garden room at the rear of the garden
Repair and replacement of the roof, rebuilding of the chimney, external refurbishment, removal of a roof light window and replacement and repair of windows.
Construction of hip-to-gable roof extension and insertion of 1 x dormer window to rear in connection with conversion of loft to habitable accommodation. Construction of two storey rear extension, external and fenestration alterations
Certificate of Lawfulness for existing two-storey rear extension
Hip to gable dormer loft conversion and insertion of Juliet balcony
Single storey rear extension incorporating a roof lantern and extension to lower ground floor. Erection of wall.
Discharge of Condition 3 (window) attached to 3/25/1426/LBC
Discharge of Condition 3 (samples of materials) attached to 3/20/2642/FUL.
Application for approval of details reserved by conditions 5 (noise sound insulation) and 6 (sound Insulation resi/commercial) pursuant to planning approval 3/20/2642/FUL
Discharge of Condition 3 (Programme of archaeological work) attached to 3/24/0810/FUL.
Discharge of condition 3 (Materials and Lighting) attached to 3/25/1516/LBC The main external fascia signage materials and lighting are being submitted for approval which includes the following: - A set of flat cut 5mm aluminium letters powder coated in white. - Post Office logo is to be digitally printed in red and white on matt laminated acrylic. Red colour is Pantone 186 and white colour is Perspex 069. - Letters and Post Office logo to have brass locators to the reverse for fixing to fascia painted to match grey, Pantone 419C. - The lighting above the main fascia signage consists of an aluminium trough light situated over Banking Hub lettering, painted in black / grey to match RAL 7021. Refer to drawing 01_BANKING HUB_WARE_REV 00 and trough light specification submitted as part of this application.
Creation of the acoustic compound to house the new Air Source Heat Pump, and the secondary perforated fenced compound for the bin store and a pre-fabricated buggy shelter
Discharge of condition 4 (Archaeological Written Scheme of Investigation) attached to 3/20/2642/FUL
Check recent applications before setting up alerts. This prevents older applications being sent as new alerts.
Preparation uses a shared source check. Busy sources or larger areas may need the next scheduled collection. No alerts are enabled or emails sent by this step.
