Search the selected area by proposal, reference, status, type, authority or date.
25 applications found.
Prior approval application (Part 1, Class A) for construction of single storey rear extension; depth extending from the original rear wall by 4.30 metres, a maximum height of 2.95 metres and an eaves height of 2.95 metres
Loft conversion with rear dormer and three roof lights to front
Replacement access bridge
Variation of Condition 2 (Approved plans) pursuant to planning permission (ref: 3/23/1892/FUL /Dated 03/05/2024) for (Demolition of single storey rear extension. Division of existing Class E unit to create 2 Class E units at basement and ground floor. Change of use at first and second floor to create two C3 residential dwellings. Installation of secondary glazing to front elevation. Alterations to rear to include creation of a courtyard, raising of and alterations to roof at second floor, installation of rear windows and doors, the insertion of external staircase and gantry, installation of 2 no. heating and cooling units and the creation of cycle parking and bin store). The amendments include alterations to the scheme to comply with building regulations
Variation of Conditions 2 (approved plans), 5 (new window), 6 (new doors), 7 (new plasterwork), 8 (new external rendering), 11 (Pipework and Drainage), 12 (Ventilation and Ducting), 13 (Acoustic/Insulation Boards), 14 (New Staircases), 15 (Extracts and Vents) and 16 (A/C Units Screening) pursuant to planning permission (ref: 3/23/1893/LBC/Dated 03/05/2024) for (Demolition of single storey rear extension. Division of existing Class E unit to create 2 Class E units at basement and ground floor. Conversion of Class E office space to habitable living and WC space to create 2 no. new dwellings. Installation of secondary glazing to front elevation. Alterations to rear to include creation of a courtyard, raising of and alterations to roof at second floor, installation of rear windows and doors, the insertion of external staircase and gantry, installation of 2 no. heating and cooling units and the creation of cycle parking and bin store. Insertion and removal of partition walls and doorways. Installation of internal staircase, and 2 no. mechanical ventilation and heat recovery (MVHR) systems including ducting). The amendments include alterations to the scheme to comply with building regulations
Listed building consent for repairs to the ground floor section of timber framing at the eastern end of the building (internal)
Single storey rear extension with flat roof and patio steps
New outbuilding/garden room at the rear of the garden
Repair and replacement of the roof, rebuilding of the chimney, external refurbishment, removal of a roof light window and replacement and repair of windows.
Certificate of Lawfulness for existing two-storey rear extension
Single storey rear extension incorporating a roof lantern and extension to lower ground floor. Erection of wall.
Discharge of Condition 3 (samples of materials) attached to 3/20/2642/FUL.
Application for approval of details reserved by conditions 5 (noise sound insulation) and 6 (sound Insulation resi/commercial) pursuant to planning approval 3/20/2642/FUL
Discharge of Condition 3 (Programme of archaeological work) attached to 3/24/0810/FUL.
Discharge of condition 3 (Materials and Lighting) attached to 3/25/1516/LBC The main external fascia signage materials and lighting are being submitted for approval which includes the following: - A set of flat cut 5mm aluminium letters powder coated in white. - Post Office logo is to be digitally printed in red and white on matt laminated acrylic. Red colour is Pantone 186 and white colour is Perspex 069. - Letters and Post Office logo to have brass locators to the reverse for fixing to fascia painted to match grey, Pantone 419C. - The lighting above the main fascia signage consists of an aluminium trough light situated over Banking Hub lettering, painted in black / grey to match RAL 7021. Refer to drawing 01_BANKING HUB_WARE_REV 00 and trough light specification submitted as part of this application.
Discharge of condition 4 (Archaeological Written Scheme of Investigation) attached to 3/20/2642/FUL
Discharge condition 3 (archaeology) attached to 3/24/0810/FUL
Repair and reinstatement of fire damaged roof
Demolition of existing single storey extension, change of use to pharmacy (Use Class E) and residential comprising two 1-bedroom flats and two 2-bedroom flats, loft conversion with roof lights and a new window on side elevation, alterations to openings, fenestration and gates/railings, installation of ramp and steps, solar panels, vents/flues for bathrooms and kitchens. Creation of two bin stores, cycle store and amenity areas.
Change of use to Use Class E comprising medical, other services and pharmacy at ground floor and offices on upper floors, internal alterations including layout alteration, removal and new partition walls, blocking up existing openings, external alterations to existing building and gates/railings, new entrance door and window, loft conversion with roof lights and a new window on side elevation, solar panels, installation of ramp and steps, creation of bin store areas and new landscaping.
Change of use to Use Class E comprising medical, other services and pharmacy at ground floor and offices on upper floors, external alterations to existing building and gates/railings, new entrance door and window, loft conversion with roof lights and a new window on side elevation, solar panels, installation of ramp and steps, creation of bin store areas and new landscaping.
Demolition of existing single storey extension, change of use to pharmacy (Use Class E) and residential comprising two 1-bedroom flats and two 2-bedroom flats, loft conversion with roof lights and a new window on side elevation, solar panels, alterations to openings, fenestration and gates/railings, installation of ramp and steps, solar panels, creation of two bin stores, cycle store and amenity areas
Installation of a wall-mounted heating and cooling system to serve the ground floor retail premises, including an internal condenser unit mounted high level above the rear door, and the installation of an external aluminium louvred vent within the existing timber panel above the rear door to allow ventilation
Installation of an energy-efficient heating and cooling system, and an internal condenser connected to an external aluminium louvre vent fitted within an existing timber panel above the rear door of the building
Check recent applications before setting up alerts. This prevents older applications being sent as new alerts.
Preparation uses a shared source check. Busy sources or larger areas may need the next scheduled collection. No alerts are enabled or emails sent by this step.
