See applications in the area below, alongside planning rules and protections at your chosen location.
Within 0.62 miles of TW10 7EEApplication dates: 23 Sep 2025 to 23 Sep 2026Showing applications within 0.62 miles of this postcode.
15applications found0Types of mapped rules or protections found here, such as conservation areas, listed buildings or flood-risk zones. We count each type once, separately from applications. A zero means none were returned by our data sources; other restrictions may still apply.
SEARCH APPLICATIONS
Narrow your search
Search the selected area by proposal, reference, status, type, authority or date.
T1 – Lime (Tilia sp.) Re-pollard to the established historic pollard points. Remove all current regrowth extending beyond the existing pollard framework, cutting back to the previous pollard heads/suitable established pruning points. Works/removal: Remove the current cyclical regrowth back to the established pollard points. Finished height: approximately 6.0 m. Finished crown spread: approximately 3.0 m overall. Do not cut unnecessarily into the established pollard heads. Retain the existing pollarded framework. T2 – Silver Birch (Betula pendula) Carry out a light crown reduction and reshape. Works/removal: Shorten the upper crown by approximately 1.5 m and shorten overextended lateral branches by up to approximately 1.0 m, pruning back to suitable secondary growth points. Finished height: approximately 10.0 m. Finished crown spread: approximately 4.0 m overall. Retain a balanced, natural crown form. No topping or indiscriminate heading cuts. T3 – Silver Birch (Betula pendula) Carry out a light crown reduction and reshape. Works/removal: Shorten the upper crown by approximately 1.5 m and shorten overextended lateral branches by up to approximately 1.0 m, pruning back to suitable secondary growth points. Finished height: approximately 10.0 m. Finished crown spread: approximately 4.0 m overall. Retain a balanced, natural crown form. No topping or indiscriminate heading cuts. T4 – Cordyline (Cordyline australis) Remove the lowest hanging fronds together with all dead, dying and damaged fronds. Works/removal: Remove lower/dead fronds back cleanly to their point of attachment to the stem. No reduction to the main stems or overall height. Finished height: approximately 7.0 m. Finished crown spread: approximately 3.0 m overall. Retain the healthy upper crowns. T5 – Fig (Ficus carica) Crown reduce and reshape, concentrating on growth extending towards the dwelling and adjoining boundaries. Works/removal: Shorten overextended lateral growth by up to approximately 1.0–1.5 m, pruning back to suitable secondary growth points. Shorten the upper crown where required by up to approximately 0.5 m to produce a balanced crown. Finished height: approximately 4.5 m. Finished crown spread: approximately 3.5 m overall. Retain the main structural framework and encourage a more upright, balanced crown. General specification: All pruning shall be undertaken in accordance with BS3998:2010 – Recommendations for Tree Work. All cuts shall be made back to suitable growth points, retaining branch collars where applicable. No flush cutting, topping or unnecessary removal of healthy crown material. All arisings to be removed and the site left clean and tidy.
Replacement of the existing link. Replacement of first floor cladding and fenestration, and internal reconfiguration of the existing annexe. Conversion of the existing garage into a workshop and addition of a pitched roof. Replacement of windows at first floor level to match the existing. Refurbishment of windows at ground floor to match the existing.
Replacement of the existing link. Replacement of first floor cladding and fenestration, and internal reconfiguration of the existing annexe. Conversion of the existing garage into a workshop and addition of a pitched roof. Replacement of windows at first floor level to match the existing. Refurbishment of windows at ground floor to match the existing.
T1) Walnut – remove x3 low limbs to raise crown over lawn. T2) Olive – crown reduce by 1.5m to allow more light to side of house T3) Yew - reduce height by 1m to maintain size.
External alterations to the existing dwelling, modern extension and outbuilding, including re-rendering and painting; installation of a green roof to the existing extension; replacement of windows and doors; replacement of the first-floor Juliet balcony railing; replacement of a sash window with timber French doors and installation of a perforated balcony deck to the existing Juliet balcony; replacement of the street access and principal entrance doors with timber Dutch barn doors; and associated refurbishment works.
T1 Sycamore tree to lift to a standing height of 6m and selectively thin by 30% Before works 12m/12m After works 11m/11m T2 London plane to thin by 30% before 12m/12m after 11m/11m T3 Horse chestnut to thin by 30% before 12m/12m After 11m/11m
Demolition of existing outbuildings (except garage building) and creation of a new build dwellinghouse incorporating extended and refurbished garage building.
Planning information from local councils and PlanIt. Area boundaries use ONS and Planning Data where available. Check the council record for the latest decisions and documents.
SAVED REPORTSave this reportKeep this exact planning view in My Places.
Watch this area
Check recent applications before setting up alerts. This prevents older applications being sent as new alerts.
Preparation uses a shared source check. Busy sources or larger areas may need the next scheduled collection. No alerts are enabled or emails sent by this step.
Checking your analytics preference.
Help improve Place KeysGoogle Analytics is on to help us understand how our public pages are used. You can turn it off at any time. About analytics & cookies
