Search the selected area by proposal, reference, status, type, authority or date.
16 applications found.
Details pursuant to conditions U0175666 Hard and Soft Landscaping, U0175670 Ecological Enhancements, U0175674 Tree Planting Scheme Required of planning reference 23/3454/VRC
T1 – Lime (Tilia sp.) Re-pollard to the established historic pollard points. Remove all current regrowth extending beyond the existing pollard framework, cutting back to the previous pollard heads/suitable established pruning points. Works/removal: Remove the current cyclical regrowth back to the established pollard points. Finished height: approximately 6.0 m. Finished crown spread: approximately 3.0 m overall. Do not cut unnecessarily into the established pollard heads. Retain the existing pollarded framework. T2 – Silver Birch (Betula pendula) Carry out a light crown reduction and reshape. Works/removal: Shorten the upper crown by approximately 1.5 m and shorten overextended lateral branches by up to approximately 1.0 m, pruning back to suitable secondary growth points. Finished height: approximately 10.0 m. Finished crown spread: approximately 4.0 m overall. Retain a balanced, natural crown form. No topping or indiscriminate heading cuts. T3 – Silver Birch (Betula pendula) Carry out a light crown reduction and reshape. Works/removal: Shorten the upper crown by approximately 1.5 m and shorten overextended lateral branches by up to approximately 1.0 m, pruning back to suitable secondary growth points. Finished height: approximately 10.0 m. Finished crown spread: approximately 4.0 m overall. Retain a balanced, natural crown form. No topping or indiscriminate heading cuts. T4 – Cordyline (Cordyline australis) Remove the lowest hanging fronds together with all dead, dying and damaged fronds. Works/removal: Remove lower/dead fronds back cleanly to their point of attachment to the stem. No reduction to the main stems or overall height. Finished height: approximately 7.0 m. Finished crown spread: approximately 3.0 m overall. Retain the healthy upper crowns. T5 – Fig (Ficus carica) Crown reduce and reshape, concentrating on growth extending towards the dwelling and adjoining boundaries. Works/removal: Shorten overextended lateral growth by up to approximately 1.0–1.5 m, pruning back to suitable secondary growth points. Shorten the upper crown where required by up to approximately 0.5 m to produce a balanced crown. Finished height: approximately 4.5 m. Finished crown spread: approximately 3.5 m overall. Retain the main structural framework and encourage a more upright, balanced crown. General specification: All pruning shall be undertaken in accordance with BS3998:2010 – Recommendations for Tree Work. All cuts shall be made back to suitable growth points, retaining branch collars where applicable. No flush cutting, topping or unnecessary removal of healthy crown material. All arisings to be removed and the site left clean and tidy.
Upgrade of the existing telecommunications base station comprising the removal of 6 no. antennas and replacement with 6 no. antennas on replacement support backets and antenna poles, 2 no. antennas to be relocated on the new antenna support brackets and poles, the installation of 1 no. GPS module, associated radio units and other ancillary works (upgraded radio equipment to be housed within the existing equipment cabin).
T1) Walnut – remove x3 low limbs to raise crown over lawn. T2) Olive – crown reduce by 1.5m to allow more light to side of house T3) Yew - reduce height by 1m to maintain size.
Erection of a new 2-bedroom bungalow with solar panels.
Details pursuant to condition NS35 (Part E) - Mechanical Services Noise Control, of planning permission 22/1442/FUL.
External alterations to the existing dwelling, modern extension and outbuilding, including re-rendering and painting; installation of a green roof to the existing extension; replacement of windows and doors; replacement of the first-floor Juliet balcony railing; replacement of a sash window with timber French doors and installation of a perforated balcony deck to the existing Juliet balcony; replacement of the street access and principal entrance doors with timber Dutch barn doors; and associated refurbishment works.
Confirmation that relevant works have been carried out to enable the implementation of planning permission 22/1486/FUL for demolition of garage block and redevelopment of the site for two three storey four bed townhouses (Class C3) with associated amenity space, car and cycle parking and refuse stores.
Proposed 1x new 3T Remote Gas Cooler to be installed on 100mm high tico pad. Proposed 2x new Daikin AC Heat Pump installed on 100mm high tico pad. Proposed 1x Standard AC unit installed on 100mm high tico pad.
Details pursuant to condition 4(c) - arboricutural monitoring and 31(3) - tree planting, of planning permission PA25/0894.
Details required for Condition 4 (Cycle Parking Facilities) and Condition 6 (Fire Safety Strategy) of planning permission 25/03153/HOU (Demolition of an existing rear garage and erection of a single storey rear outbuilding for office use.)
Repair and reinstate front boundary wall.
There are 2 separate tree cut backs requested 1. Cut back to boundary of 8 Ham Farm Road the branches that overhang the property into 6 Ham Farm Road by 2.5 metres . Reason damaging the exterior façade and glass of 6 Ham Farm Road. Tree Species, Strawberry tree and Beech tree. The overhanging branches are off shoots and multi stems from the main tree. As shown in photo provided and circled blue. 2 Prune 2 lower branches of Oak tree in 8 Ham Farm Road. This tree was previously pollarded at the application of Beechrow, due to damaging garages. It is now growing into 6 Ham Farm Road lower than previously and directly into/onto the main roof. A TPO was requested in 2014 on this tree but refused by the planning officer. The oak tree was judged by LBRuT as of limited visual amenity and in poor condition. The pruning work to the oak tree would be carried out by a qualified arborist/ tree surgeon. Discussions with the owner of 8 Ham Farm Road are needed for permission to access the property to remove two branches growing into the roof or onto the roof. No work is to be carried out in nesting season.
Details pursuant to conditions 11 - Mechanical Services Noise Control, 30 - Energy Reduction and 34 Minibus of planning permission PA25/0894.
Demolition of existing outbuildings (except garage building) and creation of a new build dwellinghouse incorporating extended and refurbished garage building.
New lime plaster and lime wash to internal wall of the Orangery following the removal of the sand and cement render and vinyl paint.
Check recent applications before setting up alerts. This prevents older applications being sent as new alerts.
Preparation uses a shared source check. Busy sources or larger areas may need the next scheduled collection. No alerts are enabled or emails sent by this step.
These rules were checked at the search location (TW10 7HT). They do not necessarily apply to every address in the results area.
These describe protections or restrictions on the location. They are not planning applications or council decisions.
These are planning protections or restrictions that apply at the location we checked. They can affect what you are allowed to build, alter or demolish. The number beside a heading simply tells you how many overlapping map records were found — it is not a rating and it is not the number of planning applications.
This location is inside Ham House. Conservation areas can mean tighter rules for changes to the outside of a property, trees and demolition.
