144 Broad Lane Hampton Richmond Upon Thames TW12 3BW
SINGLE STOREY REAR EXTENSION (5m depth, 3m eaves height, 3.2m overall height)
- Reference
- PA26/3102
- Application date
- 7 Sep 2026
Search the selected area by proposal, reference, status, type, authority or date.
189 planning applications found.
SINGLE STOREY REAR EXTENSION (5m depth, 3m eaves height, 3.2m overall height)
Single storey rear extension, single storey side extension, and the installation of an air conditioning unit
PROPOSED SINGLE STOREY SIDE EXTENSION. PROPOSED LOFT ADDITION
PROPOSED SINGLE STOREY REAR/SIDE WRAP AROUND EXTENSION.
Part demolition/conversion of an existing garage/conservatory and construction of a two storey side extension.
Hip to gable rear dormer loft conversion, installation of two front roof lights and one new gable end window.
Proposed Upper Floor Extension with additional habitable accommodation within Loft Space and Entrance Porch.
T1 Oak - Prune back tyhe limb over the car port at 7m by 1.5 metres - to Improve light filtration and prevent further extension grwth and reduce the risk of failure. Raise over trhe house by 1 metre to prevent damage by branches contacting the propertyy and reduce ythe volume of leaf waste. Dimensions after Pruning H 19m W12m
Loft Extension involving Construction of rear dormer and installation of 2 Skylights on the front roof slope.
Single storey wraparound rear extension.
Change of use to four dwellings
Oak – Current crown spread approximately 12 metres. Reduce lateral branches on the property/house side by approximately 0.3 metres and lateral branches on the road side by approximately 0.3 metres, pruning back to suitable growth points. This would result in an approximate final crown spread of 11.4 metres and represents a minimal reduction of approximately 5% in overall crown spread. Remove epicormic growth/trunk suckers on the road side up to the crown break.
Loft conversion including hip to gable conversion both sides, rear dormer and rooflights to front and rear roof slope. Construction of first floor rear extension, replacement porch and replacement fenestration on all elevations (amended description).
Single storey rear extension and conversion of garage to habitable room.
Demolition of the existing building; Erection of replacement 5-bedroom dwelling with associated hard and soft landscaping.
Construction of a single-storey rear extension, rebuilding and enlarging a double-storey side extension and alterations to the existing roof structure with the addition of a new dormer.
Change from ground floor side window to side door to provide access to the flat's existing private garden.
Single storey side and rear extension.
Construction of single storey rear extension, 6m in depth, 3.33m in height, and 2.3m in height to eaves, following demolition of existing single storey rear extension.
Erection of a single storey rear wrap-around extension. Internal reconfiguration. Conversion of one of the existing attached garages into a home office/study room. Extension of part of the existing building footprint. Alteration to the existing roof form by replacing the current intersecting hipped roof arrangement with an open gable design. Replacement of existing windows and associated alterations to external fenestration.
Proposed single storey rear extension and rear ground floor opening alterations.
Single storey rear extension
Details pursuant to condition U0173347 (Noise mitigation of external activities) of planning permission 23/1896/FUL.
WB1 – Whitebeam 1: Prune the crown to provide approximately 1.5 metres clearance from the building elevation and reduce lateral growth to provide approximately 0.5 metres clearance beyond the kerb line, preventing branches from encroaching over the carriageway. The works are required to maintain appropriate clearance from the building and highway and to prevent interference with passing traffic. WB2 – Whitebeam 2: Prune the crown to provide approximately 1.5 metres clearance from the building elevation and reduce lateral growth to provide approximately 0.5 metres clearance beyond the kerb line, preventing branches from encroaching over the carriageway. The works are required to maintain appropriate clearance from the building and highway and to prevent interference with passing traffic. PH1 – Photinia 1: Reduce the overall height and spread by approximately 25%, trimming into a compact, rounded form, and lift the lower growth clear of the adjacent wall. The works are required to maintain the hedge in an appropriate size and shape and to prevent contact with the wall. BPT1 – Bay: Reduce the crown back to previous pruning points and trim the sides to maintain the existing hedge form. The works are required to maintain the tree at an appropriate size and preserve its established shape.
Get alerts when a new application appears.