144 Broad Lane Hampton Richmond Upon Thames TW12 3BW
SINGLE STOREY REAR EXTENSION (5m depth, 3m eaves height, 3.2m overall height)
- Reference
- PA26/3102
- Application date
- 7 Sep 2026
Search the selected area by proposal, reference, status, type, authority or date.
153 planning applications found.
SINGLE STOREY REAR EXTENSION (5m depth, 3m eaves height, 3.2m overall height)
Variation of condition 2 (approved plans) to allow minor amendments to the approved outbuilding of planning permission P/2026/1547 approved 13/07/2026 for the erection of a single storey detached outbuilding.
Single storey rear extension, single storey side extension, and the installation of an air conditioning unit
PROPOSED SINGLE STOREY SIDE EXTENSION. PROPOSED LOFT ADDITION
Details pursuant to condition C5 - footway details of planning reference PA26/1930
PROPOSED SINGLE STOREY REAR/SIDE WRAP AROUND EXTENSION.
Part demolition/conversion of an existing garage/conservatory and construction of a two storey side extension.
Hip to gable rear dormer loft conversion, installation of two front roof lights and one new gable end window.
T1 Oak - Prune back tyhe limb over the car port at 7m by 1.5 metres - to Improve light filtration and prevent further extension grwth and reduce the risk of failure. Raise over trhe house by 1 metre to prevent damage by branches contacting the propertyy and reduce ythe volume of leaf waste. Dimensions after Pruning H 19m W12m
Loft Extension involving Construction of rear dormer and installation of 2 Skylights on the front roof slope.
Oak – Current crown spread approximately 12 metres. Reduce lateral branches on the property/house side by approximately 0.3 metres and lateral branches on the road side by approximately 0.3 metres, pruning back to suitable growth points. This would result in an approximate final crown spread of 11.4 metres and represents a minimal reduction of approximately 5% in overall crown spread. Remove epicormic growth/trunk suckers on the road side up to the crown break.
Loft conversion including hip to gable conversion both sides, rear dormer and rooflights to front and rear roof slope. Construction of first floor rear extension, replacement porch and replacement fenestration on all elevations (amended description).
Demolition of the existing building; Erection of replacement 5-bedroom dwelling with associated hard and soft landscaping.
PROPOSED SINGLE STOREY DETACHED GARDEN OUTBULDING (FOLLOWING DEMOLITION EXISTING OUTBUILDING)
Creation of dropped kerb and vehicular crossover
Ground floor rear extension 5.68 metres, maximum height 3.53 metres, 2.70 metres high to the eaves.
Erection of a detached outbuilding in the rear garden.
The proposed development comprises a single-storey rear extension, minor internal reconfiguration of the ground floor, and associated alterations including the installation of one new French door, one new rear window and two rooflights.
Erection of a pergola at the side of the property.
Construction of single storey rear extension, 6m in depth, 3.33m in height, and 2.3m in height to eaves, following demolition of existing single storey rear extension.
Erection of a single storey side and extension.
Ground floor rear extension 6.00 metres deep, maximum height 3.30 metres 3.15 metres high to the eaves.
Erection of a single storey rear wrap-around extension. Internal reconfiguration. Conversion of one of the existing attached garages into a home office/study room. Extension of part of the existing building footprint. Alteration to the existing roof form by replacing the current intersecting hipped roof arrangement with an open gable design. Replacement of existing windows and associated alterations to external fenestration.
Single storey rear extension
Get alerts when a new application appears.