On this device · kept for 30 days
See what’s proposed, what’s changing and what’s been decided.
31 applications found.
T5 and T6 - Plum Cherry - Prune by 1m, crown lift to 1.5m from ground level, remove dead branches - Reason: To maintain the trees at their current size.
Proposed non-illuminated signage to existing building
Retrospective application for the change of use of rear service and parking area to an enclosed outdoor play and learning area ancillary to the ground floor day nursery. Retention of timber pergola structures, artificial plant screening, artificial grass surfacing, timber boundary fencing and privacy screening, and buggy store.…
Retrospective application for the installation of weldmesh fencing, and close-boarded timber fencing
1x Sycamore tree - cut to ground level. Reason - The use of the tree to enter Travis Perkins site.
T1 - Robinia Pseudoacacia - Prune by approx. 3m in height, removing dead/dying branches in the upper canopy. Prune the south eastern elevation of the upper canopy by approx 3m. To remove deadwood over 35mm and over 0.5 metre in length to achieve 2.5 m crown clearance from…
Replacement building signage to former Evoke nightclub
Variation of condition 3 to approved planning application 26/00097/FUL (Increasing the roof pitch to enable a loft conversion with front and rear dormers) North-facing second-floor dormer windows to open only in a restricted top-tilt position.
First floor rear extension, change of existing pitched roof to flat roof with new roof latern to existing ground floor rear extension, new bi fold doors to existing ground floor rear extension
Loft conversion with rear dormer
x1 Horse Chestnut Tree (Marked T398 on map) - Pollarding at 9m. Decay detection testing of main stem to monitored annually. Reason: To reduce wind load and crown weight. x1 Lime (Marked T397 on map) - Basal growth removal. Reason: For full inspection. Re-inspecting in six months.
1x Beech (marked T1 on map) - Reduce crown to suitable live growing points by up to 2.5m, remove ivy from lower stem. Reason - Tree is encroaching onto neighbouring property and clients garage.
Demolition of existing building and erection of a mixed-use building comprising 7 apartments and a ground floor Class E unit with associated refuse and cycling storage.
Single storey rear extension
T1 Oak & G1 x5 Yews- Reduce by 1m max. Reason: Overgrown
The construction of a single storey rear extension, which would extend beyond the rear wall of the original house by a maximum depth of 8m, for which the maximum height would be 3.4m, and for which the height of the eaves would be 3m.
Determination as to whether prior approval of the local authority is required for the change of use of upper floors of Class e space to form 7 new residential units (in addition to the 41 residential units approved under application 26/00638/CUPAMA), with associated ground floor bin and cycle…
The installation of a new HVAC system including 4 no. condenser units externally on the second floor level of the site
Proposed Installation of two facade signs, 2 x non-illuminated projecting signs and window vinyl.
Non-material amendment to planning application 25/00486/FUL (Proposed single storey rear extension, front porch, new rooflight to rear roof slope and internal alterations) Alterations to fenestration on rear ground floor elevation.
Construction of additional storeys to each of Blocks A, B and C to create 7 new flats.
T2 - London Plane - Crown raise to a height of 4m over the access ramp. Reason: To reduce the risk of vehicle damage.
Determination as to whether prior approval of the local authority is required for the change of use of 1st floor, 2nd floor and 3rd floor from Class E to 9 flats (Class C3) (6 x 1bedroom/1person and 3 x studio flats). Existing tearoom at ground floor level remains…
4 - Hard and Soft Landscaping 7 - Boundary Treatments
Follow CM2 0HA for new applications. Keep your places together in My planning.
Within 0.62 miles of CM2 0HAPermission, permitted development and what happens next. Find your starting point.
Area guide
