On this device · kept for 30 days
See what’s proposed, what’s changing and what’s been decided.
27 applications found.
T5 and T6 - Plum Cherry - Prune by 1m, crown lift to 1.5m from ground level, remove dead branches - Reason: To maintain the trees at their current size.
Proposed non-illuminated signage to existing building
Retrospective application for the installation of weldmesh fencing, and close-boarded timber fencing
T1 - Robinia Pseudoacacia - Prune by approx. 3m in height, removing dead/dying branches in the upper canopy. Prune the south eastern elevation of the upper canopy by approx 3m. To remove deadwood over 35mm and over 0.5 metre in length to achieve 2.5 m crown clearance from…
T2 - Oak (marked T1 on the plan) - Reduce tree to give 1m clearance of property. Reason - overhanging towards 8 Crossways.
Replacement building signage to former Evoke nightclub
Variation of condition 3 to approved planning application 26/00097/FUL (Increasing the roof pitch to enable a loft conversion with front and rear dormers) North-facing second-floor dormer windows to open only in a restricted top-tilt position.
First floor rear extension, change of existing pitched roof to flat roof with new roof latern to existing ground floor rear extension, new bi fold doors to existing ground floor rear extension
Loft conversion with rear dormer
x1 Horse Chestnut Tree (Marked T398 on map) - Pollarding at 9m. Decay detection testing of main stem to monitored annually. Reason: To reduce wind load and crown weight. x1 Lime (Marked T397 on map) - Basal growth removal. Reason: For full inspection. Re-inspecting in six months.
1x Beech (marked T1 on map) - Reduce crown to suitable live growing points by up to 2.5m, remove ivy from lower stem. Reason - Tree is encroaching onto neighbouring property and clients garage.
Single storey rear extension
The construction of a single storey rear extension, which would extend beyond the rear wall of the original house by a maximum depth of 8m, for which the maximum height would be 3.4m, and for which the height of the eaves would be 3m.
Determination as to whether prior approval of the local authority is required for the change of use of upper floors of Class e space to form 7 new residential units (in addition to the 41 residential units approved under application 26/00638/CUPAMA), with associated ground floor bin and cycle…
The installation of a new HVAC system including 4 no. condenser units externally on the second floor level of the site
Proposed Installation of two facade signs, 2 x non-illuminated projecting signs and window vinyl.
Non-material amendment to planning application 25/00486/FUL (Proposed single storey rear extension, front porch, new rooflight to rear roof slope and internal alterations) Alterations to fenestration on rear ground floor elevation.
Construction of additional storeys to each of Blocks A, B and C to create 7 new flats.
Determination as to whether prior approval of the local authority is required for the change of use of 1st floor, 2nd floor and 3rd floor from Class E to 9 flats (Class C3) (6 x 1bedroom/1person and 3 x studio flats). Existing tearoom at ground floor level remains…
4 - Hard and Soft Landscaping 7 - Boundary Treatments
T9 (Marked T2) - Norway Maple - Reduce the crown of the Maple by 2.5m, concentrating on the lateral spread on the house side - Reason: To maintain size T10 (Marked T1) -Lime-Reduce by 3m height and thin by removing 20% of re growth - Reason: To maintain…
Determination as to whether the prior approval of the local authority is required for the change of use of Commercial Building to Mixed Use, comprising Commercial Use at ground floor and two dwellings at first floor.
3m Single storey rear extension and erection of an outbuilding
Change of use from two residential flats to one residential dwelling and single storey rear extension.
Follow CM2 9PL for new applications. Keep your places together in My planning.
Within 0.62 miles of CM2 9PLPermission, permitted development and what happens next. Find your starting point.
Area guide
